|
|
|
|
COMEUP INDUSTRIAL WINCHES |
|
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
| | |
| | |

|
| | |
| | |
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
| | |
| | |
| | |
| | |
|
| | |
|
↓ INDUSTRIAL Hoists & Winches (Cont.) ↓ |
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| | |
| | | Page: |   |
| | |
| | |
| | |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | 2) Hydraulic WINCHES: |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| # HV-8 | 3,630 kg / 8,000 lb HYDRAULIC |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
Features: | ● | Powered by a PTO/power take off unit driven pump | ● | Fast and variable recovery speeds for high work rate | ● | Highly efficient and constant operating torque motor | ● | 2 stage planetary gear train for greater pulling force | ● | Turn clutch by ergonomic T-handle for rapid wire rope payout | ● | Drag brake and over-center valve providing complete braking | ● | EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery | ● | Meet SAE J706, CE Machinery Directive 2006/42/EC, REMSA Standards and support EN 14492-1 |
|
|
| | |
| | |
| 
|
| | | |
| | | (Actual winch may differ from unit illustrated) |
| | | |
| | | |
| | | |
| | |
WARNING: Winches are not to be used for the lifting or moving of persons |
| | |
| | |
| | |
| | |
|
| | |  |
| | |
| | |  |
| | |
| | |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
|
|
| | | | | | | | | | | | | | | | | | | | | # HV-10 |
4,535 kg / 10,000 lb HYDRAULIC |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
Features: | ● | Powered by a PTO/power take off unit driven pump | ● | Fast and variable recovery speeds for high work rate | ● | Highly efficient and constant operating torque motor | ● | 2 stage planetary gear train for greater pulling force | ● | Turn clutch by ergonomic T-handle for rapid wire rope payout | ● | Drag brake and over-center valve providing complete braking | ● | EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery | ● | Meet SAE J706, CE Machinery Directive 2006/42/EC, REMSA Standards and support EN 14492-1 |
|
|
| | | | | | | 
| | | | | | | | (Actual winch may differ from unit illustrated) |
| | | |
| | | |
| | | |
| | | WARNING: Winches are not to be used for the lifting or moving of persons |
| | |
| | |
| | |
| | | |
| | |  |
| | | | | |  | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | | | | | | | | | # HV-12 |
5,540 kg / 12,000 lb HYDRAULIC |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
Features: | ● | Powered by a PTO/power take off unit driven pump | ● | Fast and variable recovery speeds for high work rate | ● | Highly efficient and constant operating torque motor | ● | 2 stage planetary gear train for greater pulling force | ● | Turn clutch by ergonomic T-handle for rapid wire rope payout | ● | Drag brake and over-center valve providing complete braking | ● | EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery | ● | Meet SAE J706, CE Machinery Directive 2006/42/EC, REMSA Standards and support EN 14492-1 |
|
| | | | | | | | 
|
| | | |
| | |
Actual winch may differ from unit illustrated) |
| | |
| | |
| | |
| | |
| | |
| | |
|
WARNING: Winches are not to be used for the lifting or moving of persons |
| |
| | |
| | |
| | |
| | |
| | |
| | | | | |  | | | | | | | |  | | | | | | | | | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | | | | | | | | | # HV-15 |
6,800 kg / 15,000 lb HYDRAULIC |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
Features: | ● | Powered by a PTO/power take off unit driven pump | ● | Fast and variable recovery speeds for high work rate | ● | Highly efficient and constant operating torque motor | ● | 2 stage planetary gear train for greater pulling force | ● | Turn clutch by ergonomic T-handle for rapid wire rope payout | ● | Drag brake and over-center valve providing complete braking | ● | EN 14492-1 supported: 10:1 D/d ratio and 2:1 wire rope strength allow severe duty vehicles and commercial recovery | ● | Meet SAE J706, CE Machinery Directive 2006/42/EC, REMSA Standards and support EN 14492-1 |
|
|
| | | | | | | 
| | | | | | | | (Actual winch may differ from unit illustrated) |
| | | |
| | | |
| | | |
| | | WARNING: Winches are not to be used for the lifting or moving of persons |
| | |
| | |
| | |
| | | |
| | |  |
| | | | | |  | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
|
| | | | | | | | | | | | | | | | | | | | | # HV-20000 |
9,070 kg / 20,000 lb HYDRAULIC |
| Replaced by Bison 20 | | | | | | | | | | | | | | | | | | | |
Features: | ● | Hydraulic motor with negative brake and needle bearings for high holding torque and minimum servicing | ● | Compact unit with maximum brake/motor integration | ● | High efficiency 2-stage planetary gear train for greater pulling force | ● | Spring applied drag brake with one-way clutch | ● | Rotating ring gear clutch is a pull and turn design for rapid wire rope payout | ● | 10:1 D/d ratio allows for heavy duty applications on car transporter wrecker, tractor, lorry and fire/rescue engine | ● | Meet SAE J706, CE Machinery Directive 2006/42/EC |
|
|
| | | | | | | 
| | | | | | | | (Actual winch may differ from unit illustrated) |
| | | |
| | | |
| | | |
| | | WARNING: Winches are not to be used for the lifting or moving of persons |
| | |
| | |
| | |
| | | |
| | |  |
| | | | | |  | | | | | | | |
| | | | | | | | | | | | | | | | | | | | | |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
| |
# HV-30000 |
13,610 kg / 30,000 lb
HYDRAULIC |
|
Replaced by Bison
30 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
Features: | ● |
Hydraulic motor with negative brake and needle bearings for high holding torque and minimum servicing | ● |
Compact unit with maximum brake/motor integration | ● |
High efficiency 2-stage planetary gear train for greater pulling force | ● |
Spring applied drag brake with one-way clutch | ● |
Rotating ring gear clutch is a pull and turn design for rapid wire rope payout | ● |
10:1 D/d ratio allows for heavy duty applications on car transporter wrecker, tractor, lorry and fire/rescue engine | ● |
Meet SAE J706, CE Machinery Directive 2006/42/EC |
|
|
| | |
|
|
|
|

|
|
|
|
|
|
|
|
(Actual winch may differ from unit illustrated) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING: Winches are not to be used for the lifting or moving of persons |
| |
|
|
|
|
| |
|
| | |
|
| | |
 |
| |
|
|
|
|
 |
|
|
|
|
|
|
|
| | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
| |
|
|
|
#
BISON 20 |
9,070 kg / 20,000 lb (SAE J706 & EN 14492-1 rating) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
| |
|
● |
New mechanical MDB (Multi-Disc Brake) and two
ways counterbalance valve together to control
and hold the load |
● |
Built-in air clutch for rapid wire rope payout |
● |
Great for severe duty trailers, roll-back
carriers, and commercial recovery application. |
● |
Fast and variable recovery speeds for high
working |
● |
Powerful and constant output hydraulic motor
allows extreme duty performance |
● |
MeetsSAE J706, CE machinery directive 2006/42/EC
and EN 14492-1:2006 Power Driven Winches |
● |
Roller fairlead, cable tensioner and two ways
counterbalance valve come as standard
accessories. |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
|
 |
| |
| |
| |
|
(Actual winch may differ from unit illustrated) |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
WARNING: Winches are not to be used for the lifting or moving of persons |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
 |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#
BISON 30 |
13,600 kg / 30,000 lb (SAE J706 rating) | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
● |
New mechanical MDB (Multi-Disc Brake)
and two ways counterbalance valve
together to control and hold the load |
● |
Built-in air clutch for rapid wire rope
payout |
● |
Great for severe duty trailers,
roll-back carriers, and commercial
recovery application. |
● |
Fast and variable recovery speeds for
high working |
● |
Powerful and constant output hydraulic
motor allows extreme duty performance |
● |
MeetsSAE J706, revised AUG2003 and CE
specifications |
● |
Roller fairlead, cable tensioner and two
ways counterbalance valve come as
standard accessories. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
(Actual winch may differ from unit illustrated) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
WARNING: Winches are not to be used for the lifting or moving of persons |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#
BISON 40en |
18,100 kg / 40,000 lb
(SAE J706 rating) EN Version |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
● |
Powered by a PTO (power take off unit)
driven pump with variable recovery
speeds for high working rate |
● |
51.8 cm3/rev
highly efficient and constant operating
torque motor with 18,100 kg / 40,000 lb
capacity |
● |
Hardened 2 stage planetary gear train
with 44:1 gear ratio provides faster
line speed |
● |
Built-in air clutch for rapid wire rope
payout |
● |
Multi-Disc Brake ( MDB ) patented for
holding full load |
● |
Great for severe duty trailers,
roll-back carriers, and commercial
recovery application |
● |
Roller fairlead, cable tensioner and two
ways counterbalance valve supplied |
● |
Meets SAE J706 , CE machinery directive
2006/42/EC |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
(Actual winch may differ from unit illustrated) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
WARNING: Winches are not to be used for the lifting or moving of persons |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
|
#
BISON 50en |
22,680 kg / 50,000 lb
(SAE J706 rating) EN Version |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
● |
Powered by a PTO (power take off unit) driven
pump with variable recovery speeds for high
working rate |
● |
51.8 cm3/rev
highly efficient and constant operating torque
motor with 22,680 kg / 50,000 lb capacity |
● |
Hardened 2 stage planetary gear train with 44:1
gear ratio provides faster line speed |
● |
Built-in air clutch for rapid wire rope payout |
● |
Multi-Disc Brake ( MDB ) patented for holding
full load |
● |
Great for severe duty trailers, roll-back
carriers, and commercial recovery application |
● |
Roller fairlead, cable tensioner and two ways
counterbalance valve supplied |
● |
Meets SAE J706 , CE machinery directive
2006/42/EC |
| |
| |
| |
| |
| |
| |
| |
|
| |
| |
| |
|
 |
| |
| |
| |
|
(Actual winch may differ from unit illustrated) |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
WARNING: Winches are not to be used for the lifting or moving of persons |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
 |
|
| |
| |
| |
| |
| |
| |
| |
|
|
|
|
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | Page: |
  | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
|
|
|